TITEBOND 473mL III Ultimate Wood Glue TBD-3-473ML

Titebond III Ultimate is the most advanced wood glue available today. While all Titebond products provide superior performance, Titebond III is especially useful for outdoor applications in cooler temperatures or when concern for substantial moisture calls for the use of a Type I glue (USA boil test). For interior applications, the longer working time of Titebond III provides woodworkers the necessary latitude to ensure that substrates are precisely aligned before being bonded. Overall, Titebond III combines superior strength, and ability with water cleanup the ease of use of aliphatic resins with the durability and water resistance of polyurethanes into one easy-to-use formulation.

• Passes ANSI/HPVA Type I water-resistance and D3 European standard ( passes the USA boil test)
• Waterproof formula that cleans up with water
• Superior strength – Strong initial tack (has the highest bond strength of the cross-link PVA)
• Designed for interior and exterior applications
• Longer open assembly time
• Lower application temperature
• Unaffected by finishes
• FDA approved for indirect food contact

Specifications

• Type: Advanced Proprietary Polymer
• State: Liquid
• Colour: Tan
• Dried film: Light Brown
• Solids: 52%
• Viscosity: 4,200 cps
• Storage life: 24 months in tightly closed containers below 24°C
• Calculated VOC: 9 g/L
• Weight per gallon: 4.17kg
• Chalk temperature: Approximately 7°C
• Flashpoint: > 93°C
• Freeze/thaw stability: Stable
• pH: 2.5

*Chalk temperature indicates the lowest recommended temperature at which the glue, air, and materials can be during the application, to assure a good bond.

Application Guidelines

• Application Temperature: Above 8.33°C.
• Open Assembly Time: 8-10 minutes (21.1°C./50%RH)
• Total Assembly Time: 20-25minutes (21.1°C./50%RH)
• Minimum Required Spread: Approximately 6.18 square meters per litre
• Required Clamping Pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
• Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
• Cleanup: Damp cloth while the glue is wet. Scrape off and sand dried excess.

Limitations

Not for continuous submersion or for use below the waterline. Not for structural or load-bearing applications. Use when temperature, glue, and materials are above 7.22°C. Store product below 23.8°C. Storage above this temperature may cause the product to thicken and reduce the usable shelf life. If thickened, shake vigorously by firmly tapping the bottle on a hard surface until the product is restored to the original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. FRead Safety Daya Sheet before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Caution Statement

No caution information is needed. Please refer to the Safety Data Sheet for further information.